Maintain exact dish position for precise reception by
using durable, high quality mounts. A sturdy, yet adjustable support structure is critical
to any dish installation since your dish is exposed to shifting ground, blowing wind, and
other elements. So, check out our variety of first-rate mounts, and choose one that
fits your dish and installation needs. Mounts do not include pole unless specified.
This page features adjustable mounts, support mounts,
roof mounts, wall mounts, antenna mounts, and more. It also covers ground poles,
installation information, and supports you can build yourself! |
POLE SUPPORT MOUNT |
The Rohn PSM
can be mounted to the side or end of a
house in a one stop installation. Capable of receiving all
sizes of the optional Rohn TVRO mounting poles and utilizing the
Rohn TVRO ground base, your TVRO antenna will be elevated above
common ground mounting hazards such as bushes, trees, houses,
etc. Each Rohn PSM will be "Hot-Dip" galvanized
after fabrication insuring long life and eliminating unsightly
rust. Rohn PSM TVRO Mounts when applied in accordance with
Rohn specifications will support most TVRO antennas. An enhancement
to any installation, the Rohn PSM gives you a new dimension in TVRO
installation. Single Unit Use with concrete base Two Units No
base required (Buy two Pole
Support Mounts at the same time and save! No base required.)
|
Pole Support Mount
Buy two and save money! Price:
$179.95
Special Order Please
Call 800-576-7248 |
HEAVY-DUTY SAW HORSE ROOF MOUNT
(SHRM) |
Rohn's
SHRM (Saw Horse Roof Mount)
for TVRO application allows the placement of dishes on roof peaks or
flat roofs. A peak installation allows the dish to be above
interference created by close buildings, trees, etc., while also
freeing needed yard space. The SHRM will adjust from a flat
roof installation to any pitched room up to 12"/12".
One Trip Installation
Installation will be a snap
because of the easy assembly and adaptability. There is no need for
concrete, thus eliminating the wait for concrete to harden. Also
burying cable will also not be needed or the extra amount of cable
to reach a ground mounted dish. The Rohn URM will eliminate
some zoning problems. Security will be increased from theft or
vandalism.
Construction
Each Rohn SHRM will be
"Hot-Dip" galvanized after fabrication insuring long life
and eliminating unsightly brown rust which could eventually damage a
roof. The SHRM is constructed of heavy angle material and
engineered to support most satellite dishes. Pre-tested in Rohn's
test laboratory, this mount will enhance your installation for years
to come.
|
Saw Horse Roof Mount Price: $210.95
Special Order Please Call
800-576-7248 |
UNIVERSAL ROOF MOUNT |
Rohn's new URM (Universal Roof Mount) for TVRO application is
capable of supporting most satellite dishes. The URM
adapts to various roof pitches. The fully adjustable rear-leg
allows for use on a flat or up to a 12"/12" pitched
roof.
One Trip Installation
Installation will be a snap because of the quick
adaptability, and inclement weather installations will be no
problem. No concrete is needed. The burying of underground cable
also eliminates the need for extra cable to reach a ground
mounted dish. The Rohn URM will eliminate some zoning
problems. Security will be increased from theft or
vandalism.
Construction
Each Rohn PSM will be "Hot-Dip" galvanized after
fabrication insuring long life and eliminating unsightly brown
rust which could eventually damage a roof. The URM is
constructed of heavy angle material and engineered to support
most satellite dishes. Pre-tested in Rohn's test laboratory,
this mount will enhance your installation for years to come.
Universal Roof Mount Price: $199.95
Special Order
Please Call 800-576-7248
|
NON-PENETRATING MOUNT |
Non-Penetrating
Roof Mount with 3.5" O.D. pole, engineered for the XI-6 Plus or
XI-7 Plus antennas. Each one of the three support legs allows
for a minor adjustment to plumb the pole when installing on uneven
surfaces. A 10" X 10" square area is recommended for
installation. Perfect solution for tar, rubber, or other flat style
roofs. No drilling needed, simply weigh this down with cinder
blocks on it's flat feet. Also the NPRM has a wide base for added
stability. Ships in two UPS boxes, Pole included.
NPRM 3.5 Mount Support
Price: $349.95
Special Order Please Call 800-576-7248 |
|