Channel Master 6130
(This is a receiver only and will have a
separate dish positioner)
BUTTONS ON THE RECEVIER
- Power - On or Off
- Format - Used to select the reversed polarity when in (Galaxy), or normal
polarity when out (Satcom).
- Scan - Used to scan the horizontal channels when aiming the antenna.
- 6.8 - Push in to select that preset audio.
- 6.2 - Push in to select that preset audio.
- Manual - Push in to allow audio tuning, use with the audio tuning knob.
- Channel Up/Down - Used to change channels
KNOBS ON THE RECEIVER
- Audio Tune - Used to adjust the audio subcarrier frequency between 5.5 -
8.0 MHz
- Fine Tune - Used to adjust the fine tuning on a channel.
METERS ON THE RECEIVER
- Signal Strength LED Readout - Displays the strength of the signal
received. Used as an aid in aiming the dish or, as an overall indication of
system performance.
- Center Tune LED Readout - Used with the fine tune knob for indication of
optimum tuning on a channel. The green center LED will illuminate when it is
centered.
BUTTONS ON THE REMOTE
|