Channel Master 6135
(This is a receiver only and will have a
separate dish positioner)
BUTTONS ON THE RECEVIER
- Power - On or Off
- Audio Tuning (6.8, 6.2, ä ) - Push to
select etiher 6.8 preset, 6.2 preset or manual audio (manual is use with the
audio tuning slide control).
- Fine Tune left/right - Used to adjust the fine tuning on a channel. Used
with the center tune meter.
- Format REV- Used to select the reversed polarity when light on (Galaxy),
or normal polarity when light out (Satcom).
- Scan - Used to scan the channels when aiming the antenna.
- Channel Select Up/Down - Used to change channels
KNOBS ON THE RECEIVER
- Audio Tuning - Slide left/right to adjust the audio subcarrier frequency
between
- 5.5 - 8.0 MHz when the manual ä is
selected.
METERS ON THE RECEIVER
- Signal Strength - Displays the strength of the signal received. Used as an
aid in aiming the dish or, as an overall indication of system performance.
- Center Tune - Used with the fine tune buttons for indication of optimum
tuning on a channel.
BUTTONS ON THE REMOTE
Receiver Functions:
- Channel up/down
- Tune up/down - fine tune adjustments
- Power
- Pol - polarity
- Mute
- Scan
Stereo Functions:
Satscan:
- Up / Down
- Power
- Satellites (Satcom, Westar, Comstar, Anik, Galaxy, Spacenet, Spare1,
Spare2)
- Numbers ( 1-8 )
|