|
Channel Master 6144
(This a receiver only, it will have a separate
dish positioner - It will operate the dish positioner)
BUTTONS ON THE RECEIVER
- Power
- Format - Used to select the reversed polarity when the light is lit
(Galaxy), or normal polarity when the light is out (Satcom).
- BW - Used to select Wide or Narrow Bandwidth.
- Mode - Use to select Stereo-Discrete, Stereo-Matrix, MONO.
- Select - Selects 6.8 or Tune
- Audio A - Used to scan the audio A subcarrier frequency between 5.5 - 8.0
MHz.
- Audio B - Used to scan the audio B subcarrier frequency between 5.5 - 8.0
MHz.
- Channel Up/Down
- Antenna Up/Down - Use to adjust the antenna position number up or down.
INDICATORS ON THE RECEIVER
- LNB - Always on when AC power is connected.
- Format - Indicates polarity
- Signal Level - Displays the strength of the signal received. Used as an
aid in aiming the dish or, as an overall indication of system performance.
- Audio Mode Indicator (Mono, Discrete Stereo, Matrix Stereo)
- Audio Select Indicator (6.8, Tune)
- Audio A & B Indicators
- Wide Bandwidth Indicator
BUTTONS ON THE REMOTE
- Antenna Up/Down
- Power
- Format - Used to select the reversed polarity when the light is lit
(Galaxy), or normal polarity when the light is out (Satcom).
- Parental Set
- Parental Reset
- Seek - Press prior to moving the dish and the receiver will lock on the
first signal present.
- Channel Up/Down
- Mode - Select desired audio mode
- Audio A Up/Down
- Audio B Up/Down
- BW - Selects wide or narrow
- Select - Selects 6.8 or tune mode
- Volume Up/Down
|
