|
Specifications
Internal VideoCipher II+ capable Dual tuner inputs Decoder input - for digital or analog decoders Main and record audio/video outputs Modulated output - channel 3/4 switchable with UHF/VHF pass through Full front panel control Infrared remote control Addressable remote control - a single remote can uniquely control several receivers in the same room UHF remote control option Wideband tuner - 950 - 2050 MHz Computer controllable Flash RAM memory bank - allows user to store a custom database inside the 100c Plus Open architecture - all channels can be programmed individually making any satellite configuration or customization possible. Transfer between receivers is made simple by Memory Card transfer or computer transfer. Database transfer via memory card - allows user to easily transfer a database between units via a memory card Database transfer via computer - allows user to easily transfer a database between units via a computer with a RJ-11 connector Uplink controllable - 100c Plus can be controlled by using an audio sub-carrier on a transponder Controllable via EzyLink - Provides control of the unit via satellite, telephone or pager technology Addressable - each unit can be separately addressed in a multi-unit environment Namable channels - 1,400 namable channels Channel / Satellite scan - automatically scans for new channels or satellites C / Ku capable VCR control option 25 timed events 13 / 17V switch (coax) - controls international wideband Ku LNBs or voltage switched LNBFs Rack mount or desktop version
Back to the International Index The American-Made IRD Solution That Strikes A Perfect Balance.The Drake ESR800XT Integrated Satellite Receiver/Decoder incorporates advanced features and Drake quality. Versatile and highly sensitive, the ESR800XT offers C or Ku Band operation, a built-in antenna positioner with an automatic satellite locate system, state-of-the-art stereo audio reception, and advanced video with variable extended threshold tuning. The ESR800XT also features a programmable dealer screen, and easy-to-use on-screen display menus available in six languages - including Arabic. Operation is made simple with an infrared remote control and full function front panel controls. The Drake ESR800XT is the perfect receiver for those who demand value without compromising quality. KEY FEATURESIntegrated receiver and antenna positioner with provision for adding an internal decoder module. The ESR800XT is designed to accept most popular decoder modules (i.e. VideoCrypt D2MAC/Eurocrypt) for reception of encrypted programming found around the world. The module is accessible via the front panel card reader. Two programmable bandwidth filters, 18 and 27 MHz Programmable extended threshold circuitry to provide a threshold level of less than 3 dB. Variable tuning of audio threshold extension, noise reduction, and companding circuitry for superior stereo audio compatible with Wegener audio transmissions. 100 Satellite memory positions 800 programmable channel memory, 400 favorite channel program list. Unit can be programmed via the remote control. Additionally, programming parameters can be updated with another ESR800XT with a personal computer or with the optional Drake Data Transfer Unit. Dual input tuner for multiple LNB connections. Three SCART connections Auto Sat Locate feature enables automatic location and tuning of satellites. Six selectable language menus (Arabic, English, French, German, Portuguese, Spanish). Parental Lock to prevent viewing of unwanted programming. Programmable four event timer for video recording. Automatic signal peaking feature. Automatically returns to "last channel tuned" after power loss. SpecificationsThe ESR800XT is an American made, full featured satellite receiver with the ability of integrating a card reader/decoder module. On-Screen Display menus in six languages (Arabic, English, French, German, Portuguese, Spanish) simplify programming and operation. The receiver has a built-in antenna positioner that allows simple, error-free control of the antenna, and boosts the Drake Auto Sat Locate feature to automatically locate satellites and align the antenna. Rear panel connectors allow versatile interconnections to other video equipment such as video recorders and decoders. The ESR800XT may be programmed to receive up to 800 channels complete with video/audio and antenna settings. Effortless operation is provided by front panel controls and by means of an infrared remote control that allows for adjusting any channel as desired. The ESR800XT is preprogrammed with many popular video and audio programs which may be added or deleted as desired. Programming and operating parameters may be updated via a personal computer or with a Drake Data Transfer Unit. RFInput Frequency: 950-2050 MHz Input Signal Level: -30 dBm to -50 dBm IF Inputs: 2 'F' Connectors Input Impedance: 75 Ohms Carrier-to-Noise threshold: <6dB, <3 dB with maximum threshold extension setting Intermediate Frequency: 479.5 MHz Image Rejection: 40 dB, typical IF Bandwidth: 27/18
MHz VIDEO OUTPUTSSCART 1, SCART 3 and Decoder RCA connectors programmable for: Flat Video: 20 Hz to 10 MHz Non-de-emphasized, unclamped, unfiltered Composite Video: 20 Hz to 10 MHz De-emphasized, unclamped, unfiltered Filtered Video: 20 Hz to 5 MHz, De-emphasized, clamped, filtered. SCART 2 and VIDEO RCA Connector: 20 Hz to 5 MHz, De-emphasized, clamped, filtered with on screen display. Output Level: 1 VP p. nominal (+ 35% adjustment range, programmable in 26 steps) Output Impedance: 75
Ohms AUDIOIF Bandwidth: Adjustable from 69 kHz to 622 kHz in 28 steps Modes: Stereo, Mono Subcarrier Range: 5 to 9 MHz Output Level: 0 dBm, typical at maximum volume Output Impedance: 600 Ohms Harmonic Distortion:
Less than 1.5% UHF ModulatorOutput Range: CCIR CH 21 to CH 69 Output Level: 75 dBuV, typical Format: PAL I/GB ACTUATOR
VideoCrypt is a trademark of Thomson Consumer Electronics, S.A.
Back to the International Index Drake sets a new standard with the ESR2000XT, the Satellite Receiver/Decoder capable of integrating two card reader decoder modules. The ESR2000XT offers a built-in antenna positioner with an automatic satellite locate system, an option to track incline orbit satellites, state-of-the-art stereo audio reception, and advanced video with variable extended threshold tuning. The ESR2000XT also features a programmable dealer screen, and easy-to-use on-screen display menus available in six languages- including Arabic. On-screen Display functions in PAL, SECAM, or NTSC formats. Operations is easy with an infrared remote control that can actually "learn" the most frequently used keystrokes. The multi-standard, multi voltage ESR2000XT is the superior choice to satisfy customers around the world. KEY FEATURES:Integrated receiver and antenna positioner with provisions for adding an internal decoder module. The ESR2000XT is designed to accept most popular decoder modules (i.e. VideoCrypt, D2MAC/Eurocrypt) for reception of encrypted programming found around the world. The module is accessible via the front panel card reader. Two programmable bandwidth filters, 18 and 27 MHz. Programmable extended threshold circuitry to provide a threshold level of less than 3 dB. Variable tuning of audio threshold extension, noise reduction and companding circuitry for superior stereo audio compatible with Wegener audio transmissions. 100 Satellite memory positions. 2000 programmable channel memory: 400 favorite channel program list. Unit can be programmed via the remote control. Additionally, programming parameters can be updated by an installer with another ESR2000XT, with a personal computer or with the optional Drake Data Transfer Unit. Automatic inclined orbit tracking with the optional IOA600 accessory. Dual input tuner for multiple LNB connections. Infrared remote with macro capability for simplified use of frequently used keystrokes. Four SCART connections Auto Sat Locate feature enables automatic location and tuning of satellites. Six selectable language menus (Arabic, English, French, German, Portuguese, Spanish). Parental Lock to prevent viewing of unwanted programming. Programmable eight event timer for video recording. Automatic signal peaking feature. SPECIFICATIONS:RFInput Frequency: 950-2150 MHz Input Signal Level: -30 dBm to -60 dBm IF Inputs: 2 'F' Connectors Static Threshold: <6dB, <3 dB with maximum threshold extension setting Intermediate Frequency: 479.5 MHz Image Rejection: 40 dB, typical IF Bandwidth: 27/18 MHz Filtered Video: 20 Hz
to 5 MHz De-emphasized, clamped, filtered VIDEO OUTPUTS
Flat Video: 20 Hz to 10 MHz Non-de-emphasized, unclamped, unfiltered Composite Video: 20 Hz to 10 MHz De-emphasized, unclamped, unfiltered SCART2 and VIDEO RCA Connector: 20 Hz to 5 MHz De-emphasized, clamped, filtered with on-screen display Output Level: 1 Vp-p, nominal (+ 35% adjustment range, programmable in 26 steps) Output Impedance: 75
Ohms AUDIOIF Bandwidth: Adjustable from 69 kHz to 622 kHz in 28 steps Modes: Stereo, Mono Subcarrier Range: 5 to 9 MHz Output Level: 0 dBm, typical at maximum volume Output Impedance: 600 Ohms Harmonic Distortion:
Less than 1.5% UHF ModulatorOutput Range: CCIR CH 21 to CH 69 Output Level: 75 dBuV, typical Format: PAL I/GB ACTUATORSensor Type: Hall/Reed/Optical Motor Drive: 36 VDC @
4A; units sold in the EC are rated 3A POLARIZERServo: 5 VDC @ 500 mA for 10 seconds (Mechanical) Magnetic: + 5 VDC @ + 75 mA LNB POWER 13 to 20 VDC @ 300 mA total for 2 LNBs (programmable in 1 VDC step) 22 kHz tone switching (programmable) PRIMARY POWER 180-264 VAC 50/60 Hz (90-140 VAC by special order) OPERATING TEMPERATURE +10 to +40 degrees Celsius MECHANICALSize: 8.0 cm H x 40.7 cm W x 30.0 cm D Weight: 3.6 kg net, 5.3 kg shipping * Specifications, pricing and features subject to change without notification or obligation. TM VideoCrypt is a trademark of Thomson Consumer Electronics S.A.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||