|
|
|
|
|
POC-20AP
Digital Optical Toslink to Toslink Cable with Interchangeable Mini Plug Adapter
|
|
$39.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3025
Whole House Video Distribution System with Dual Input Modulator
|
More Info
|
$236.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CP1100
Power booster. Use with CP1112 when dish is over 100 ft. away.
|
More Info
|
$79.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VIDCON
No coax needed to send satellite, VCR or DVD signals to any room in the house. Transmitter sends video and two audio signals (stereo) to the receiver at 2.4Ghz. Will not interfere with VHF, UHF or FM signals. Crisp and clean video reception. Includes one transmitter, one receiver, two rca patch cords and two AC adapters.
|
More Info
|
$199.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CM7720
Model 7720 is a broadband amplifier designed for small to medium-sized MATV systems, and is specified for use with either off-air or CATV input signals. Fully shielded, the amplifier uses surface mount technology for repeatable high performance.
|
|
$51.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CM7721
Model 7721 is a broadband amplifier designed for small to medium-sized MATV systems, and is specified for use with either off-air or CATV input signals. Fully shielded, the amplifier uses surface mount technology for repeatable high performance.
|
More Info
|
$57.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CM7723
Small 75 ohm MATV amplifier for use in home or small MATV systems. Single input has separate VHF and UHF amplification to minimize intermodulation distortion. Fully shielded, the amplifier uses surface mount technology for repeatable high performance.
|
More Info
|
$59.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CM7722
Model 7722 is a broadband amplifier designed for small to medium-sized MATV systems, and is specified for use with either off-air or CATV input signals. Fully shielded, the amplifier uses surface mount technology for repeatable high performance.
|
More Info
|
$65.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CM7020D
Designed to distribute signals for a CATV drop line in applictions such as apartment buildings, schools, and office buildings. For small to medium size systems.
|
|
$133.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CM7034C
For use in larger systems. These are CATV hybrid IC amplifiers as used in trunk amplifiers. The flat response to 550 MHz use in the latest CATV systems carrying hyperband channels. Front panel gain and slope controls for easy adjustment.
|
More Info
|
$349.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CM7054
For use in larger systems. These are CATV hybrid IC amplifiers as used in trunk amplifiers. The flat response to 550 MHz use in the latest CATV systems carrying hyperband channels. Front panel gain and slope controls for easy adjustment.
|
More Info
|
$379.88
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6904IFD
The Channel Master 22KHz Multiswitch, model 6904IFD01, allows up to four satellite receivers access to both polarizations from two satellites. If the 22KHz tone supplied by newer model satellite receivers is present, the Multiswitch 6904IFD01 selects the 119° satellite location. If there is no 22KHz tone present, the Multiswitch 6904IFD01 will automatically select the 101° location. The Multiswitch 6904IFD01 can be mounted for both indoor and outdoor applications or it can be conveniently mounted to the back of the 18" x 24" multi-satellite antenna.
|
More Info
|
$99.95*
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CM3038
Optional amplifier with split band amplification, provides a signal gain of 15dB on UHF & 15dB on VHF/FM. Consists of amplifier power supply requirements: 12 to 22 VDC.
|
More Info
|
$49.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3025 XA
Whole House Video Distribution System with Dual Input Modulator - without Amp
|
|
$236.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CP3025
Digital modulator converts two video inputs to catv channels 65-125 (not including 95~99). Power supply included. 12dBm Output.
|
More Info
|
$299.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVTR15LE
This amplifier is excellent for extending a distribution network. Unit has a corrosive resistant housing.
|
More Info
|
$39.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AHC16
16 Channel Active Headend Combiner. Accepts broadband outputs from 54-550 MHz.
|
More Info
|
$379.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVSC3
This signal combiner is designed with high quality six-stage band pass and bandstop filters with adjustable balancing attenuators. This enables the user to combine a locally originated channel 3 or 4 into an existing home MATV system containing adjacent channels. This model has a built-in amplifier which is able to compensate for any loss from long runs of coax cable or any other reasons where signal amplification is needed. Some of the more common applications are for multi TV operation without the need for A/B switches, simultaneous recording and viewing of premium channels and off-air signals without the use of A/B switches. It will also allow the use of TV remote controls to switch between off-air and cable or a satellite receiver.
|
More Info
|
$19.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVSC4A
This signal combiner is designed with high quality six-stage band pass and bandstop filters with adjustable balancing attenuators. This enables the user to combine a locally originated channel 3 or 4 into an existing home MATV system containing adjacent channels. This model has a built-in amplifier which is able to compensate for any loss from long runs of coax cable or any other reasons where signal amplification is needed. Some of the more common applications are for multi TV operation without the need for A/B switches, simultaneous recording and viewing of premium channels and off-air signals without the use of A/B switches. It will also allow the use of TV remote controls to switch between off-air and cable or a satellite receiver.
|
More Info
|
$34.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVILA20W
These high-quality amplifiers have a sloped gain to offset the tilt occurring in longer cable runs and helps to balance the system.
|
More Info
|
$29.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVSC3A
This signal combiner is designed with high quality six-stage band pass and bandstop filters with adjustable balancing attenuators. This enables the user to combine a locally originated channel 3 or 4 into an existing home MATV system containing adjacent channels. This model has a built-in amplifier which is able to compensate for any loss from long runs of coax cable or any other reasons where signal amplification is needed. Some of the more common applications are for multi TV operation without the need for A/B switches, simultaneous recording and viewing of premium channels and off-air signals without the use of A/B switches. It will also allow the use of TV remote controls to switch between off-air and cable or a satellite receiver.
|
More Info
|
$29.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVTRD12
Dual Output Directional Tap. 40-2150 MHz. For Large or Medium Distribution Systems.
|
More Info
|
$29.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVILA20WS
These high-quality amplifiers have a sloped gain to offset the tilt occurring in longer cable runs and helps to balance the system.
|
More Info
|
$39.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVTR13LA
This amplifier is excellent for extending a distribution network. Unit has a corrosive resistant housing.
|
More Info
|
$49.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TPCH12
Designed to combine the multiple modulator and processor adjacent channel outputs that make up the head-end. Extremely reliable.
|
More Info
|
$129.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVTR24DLA
Dual Polarity. 24 dB gain slope compensated. Power supply included.
|
More Info
|
$169.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|